Nude Window

HOW TO MEASURE

Just follow these simple instructions.

HOW TO MEASURE FOR ROLLER BLINDS

Reveal: (Inside window frame)

  • Measure in millimetres the inside width of your window in three places: top, middle, and bottom and choose the smallest measurement. We will deduct 2 millimetres to this width for an easy fit.
  • Measure in millimetres the inside drop of your window only once.
Note: The fabric of a roller blind is narrower than the bracket to bracket measurement, leaving a left and right light gap; if you would like to avoid this gap you should consider fitting your blind on the face.

Face: (Mount on architrave)

  • Measure the width in millimetres from outside of the architrave (left), to the outside of architrave (right) in only one place: the top. We will not make any deduction to your finished blind.
  • Measure the drop in millimetres from the top of the architrave to the bottom of the architrave only once.

Face: (Mount on wall above architrave)

  • Measure the width in millimetres from the outside of the architrave (left) to the outside of the architrave (right) in only one place: the top. We will not make any deduction to your finished blind.
  • Measure the drop in millimetres from the top of the architrave to the bottom of the architrave only once and add 120mm to this measurement to cover the extra top and bottom of your window.

HOW TO MEASURE FOR CURTAINS

Ceiling: (Ceiling mount)

Width: Measure in millimetres the inside width of your window and add 400mm to this measurement, this will cover the architrave and will leave space in the track for when the curtain is bunched opened, allowing extra light into your room. If the window is wall to wall, measure from wall to wall and take 20mm for a comfortable fit of the track. Drop: Measure in millimetres the drop in three different points: left, middle and right from the ceiling to where you want your curtain to finish. We suggest a clearance of 15mm, so your curtain does not touch the floor. We will not make any deductions to this length. Choose the shortest measurement.

Face: (Wall Mount)

Width: Measure in millimetres the inside width of your window and add 400mm to this measurement, this will cover the architrave and will leave space in the track for when the curtain is bunched opened, allowing extra light into your room. If the window is wall to wall, measure from wall to wall and take 20mm for a comfortable fit of the track.Drop: Measure in millimetres the drop from where the top of the curtain will be to where you want your curtain to finish. We suggest you leave an allowance of 120mm minimum above the architrave to get space to fit the brackets comfortably. We will not make any deductions to this length.